 |
- A new MiraTEC product that combines the convenience and performance of an engineered wood product to create a cost-effective solution that adds curb appeal.
- Provides builders and remodelers with new option for creating an authentic board and batten look.
- With a clear cedar wood grain texture on one side and a contemporary, smooth finish on the other, the distinctive vertical style is perfect for adding charm and dimension to any home.
4/4 Nominal Thickness (3/4" Actual)
| Size |
16' Pieces |
| NOMINAL |
ACTUAL |
BUNDLE |
UNIT |
| 2" x 192" |
2" |
12 |
336 |
5/4 Nominal Thickness (1" Actual)
| Size |
16' Pieces |
| NOMINAL |
ACTUAL |
BUNDLE |
UNIT |
| 2" x 192" |
2" |
9 |
252 |
2" MiraTEC batten offers revolutionary performance from patented technology
Manufacturing process bonds natural wood fibers with phenolic resins and zinc borate
- Moisture, rot and termite resistant
- One solid piece, not laminated - won't check, split, crack or delaminate
- More uniformly dense across its thickness; cuts consistently
- Easy to handle, machine, cut and nail
- Factory-primed on four sides with a low VOC primer with a mildewicide
- Class C fire rating: Flame spread 120; Smoke developed 90
- Provides green building benefits
Splashy performance in every test
Manufacturing process bonds natural wood fibers with phenolic resins and zinc borate
- Moisture resistant: As measured by ASTM D1037 for Water Absorption and Thickness Swelling
- Rot resistant: Tested per AWPA E16 Field Test for Evaluation of Wood Preservatives to be Used Out of Ground Contact: Horizontal Lap-Joint Method
- Termite resistant: As measured by AWPA E7 Standard Method of Evaluating Wood Preservatives by Field Tests with Stakes
2" MiraTEC batten provides green building benefits
- 2" MiraTEC batten has no added urea formaldehyde. This is certified by Scientific Certification Systems, certificate number SCS-MC-01802. Emission levels of formaldehyde from 2" MiraTEC batten are equivalent to trace levels found in the environment.
- Due to its physical composition, 2" MiraTEC batten is not subject to the California Air Resources Board's (CARB) Airborne Toxic Control Measure 93120 (ATCM). This measure enforces limits on formaldehyde emissions. formaldehyde emitter." MiraTEC trim has demonstrated formaldehyde emissions equivalent to wood through repeated testing by the Composite Panel Association (CPA), a third party certifier for the ATCM rule.
- No old growth wood is used in the manufacture of 2" MiraTEC batten. It is made from scrag wood that is of no commercial timber value and is the byproduct of other operations. Scrag wood is also detrimental to the overall vitality of the forest.
- All wood comes from an area within a 200 mile radius of the Towanda, PA production facility
- CMI uses 100% northern hardwoods which includes maple, beech, oak and other species
- 2" MiraTEC batten contributes to industry programs, such as LEED® and NAHB - National Green Building Standard™.
Board and Batten Application Instructions
MiraTEC trim is not approved for use as a cladding or siding product. However, the 2" MiraTEC batten product is acceptable for use in a board and batten application. MiraTEC batten can be applied directly on top of the board material, including but not limited to: wood fiber cement products, composite wood, and other wood products.
- Battens should fall over framing members. Nailing pattern should be 12" on center, staggered pattern. Nails should be of sufficient length to have 1 1/2" penetration into the framing member.
- Vertical battens do not need to be caulked. The board butt joint behind the batten should be treated per the siding manufacturers' recommendations.
- Battens can also be screwed into boards and sheathing, preferably over framing members. Screw type should be a minimum of a 6 mm head with full thread penetration into the board or minimum of 3/4" into the framing member. Screw pattern should be 12" on center, staggered pattern.
- A combination of nails and glue can also be used to fasten 2" MiraTEC battens.
- Treat all other applications per their instructions, such as inside and outside corners, butt joints, horizontal applications, etc.
|
